
Faraday's Law in IB Physics: Equation, Lenz's Law, Examples
Faraday’s law says the emf induced in a coil equals the negative rate of change of magnetic flux linkage: ε = −N ΔΦ/Δt. If the flux through the coil does not change, nothing is induced. Learn it as three steps: find the flux change, divide by the time, then use Lenz’s law for the direction. At Tiber Tutor, IB examiners wrote our physics questions, mark schemes and notes so you can practise this exactly as the exam asks it.
TL;DR
- Induction happens only when magnetic flux through a loop or coil changes. A steady field and a stationary coil give no emf.
- The equation is ε = −N ΔΦ/Δt, with Φ = BA cos θ. Flux is measured in webers (Wb).
- The minus sign is Lenz’s law: the induced current creates a field that opposes the change in flux.
- Most lost marks come from forgetting N, using the wrong angle, or getting the direction wrong.
- Practise with exam-style questions and examiner mark schemes, not just notes.
Table of Contents
- What Faraday’s law says
- Where it sits in the IB Physics course
- Flux, flux linkage and the equation
- Lenz’s law and the minus sign
- Three ways to change the flux
- A worked example
- Mistakes that cost marks
- How to practise it well
- Why students use Tiber Tutor for induction
- Our view
- FAQ
- Sources
What Faraday’s law says
Michael Faraday found that moving a magnet in and out of a coil makes a voltage appear in the coil. OpenStax states the law in terms of magnetic flux: the induced emf equals the negative rate of change of flux through the circuit. A changing magnetic field, a changing loop orientation or relative motion can all change the flux and so induce an emf.

Emf (electromotive force) is the energy supplied per unit charge by a source, measured in volts. In induction, the changing flux acts as the source.
NASA’s explanation of induction adds a useful picture. An emf generally appears when a magnet or coil moves relative to the other, or when an electromagnet’s field strength changes. If everything is stationary and unchanging, there is no induced emf.
Where it sits in the IB Physics course
Electromagnetic induction is a higher level topic. The IB Physics guide lists it as Topic 11, an additional higher-level section. The newer course places induction inside its fields theme. Check your own subject guide for the exact numbering, and for which parts are examined at your level.
Our IB Physics 2025 notes covering Topics 1 and 11 are a good place to see how induction connects to the rest of the course.
Flux, flux linkage and the equation
Magnetic flux measures how much magnetic field passes through a surface. For a uniform field and a flat loop, Φ = BA cos θ, as set out in this university laboratory handout:
- B is the magnetic field strength in tesla (T).
- A is the area of the loop in square metres.
- θ is the angle between the field and the normal, the line at right angles to the loop’s surface.
Flux is measured in webers, where 1 Wb = 1 T m².
For a coil of N turns, the induced emf is ε = −N ΔΦ/Δt. The product NΦ is called flux linkage. Each turn is a separate loop, so more turns multiply the emf.
Lenz’s law and the minus sign
The minus sign carries physical meaning. Lenz’s law says the induced current creates a magnetic field that opposes the change in flux. That is how you find direction:
- Decide whether the flux through the coil is increasing or decreasing.
- Choose the induced field that resists that change. If flux is increasing, the induced field points the opposite way. If it is decreasing, the induced field points the same way.
- Use the right-hand rule to turn that field direction into a current direction.
This also explains why pushing a magnet into a coil takes effort. The coil pushes back, so your work becomes electrical energy. Energy is conserved.
Three ways to change the flux
Every induction question comes down to which part of Φ = BA cos θ changes.
| What changes | Example | What to calculate |
|---|---|---|
| B | Electromagnet current rises or falls | Change in B, then ΔΦ = A cos θ × ΔB |
| A | Coil is stretched or pulled out of a field | Change in area |
| θ | Coil rotates in a field (a generator) | Change in cos θ |
A faster change gives a larger emf. Reversing the motion of a magnet reverses the sign of the emf.
A worked example
A coil has 200 turns and an area of 5.0 × 10⁻³ m². It sits with its normal parallel to a field that rises uniformly from 0.10 T to 0.50 T in 0.20 s. Find the induced emf.
- Change in field: ΔB = 0.50 − 0.10 = 0.40 T.
- Change in flux per turn: ΔΦ = 0.40 × 5.0 × 10⁻³ = 2.0 × 10⁻³ Wb. Here θ = 0°, so cos θ = 1.
- Apply the law: ε = N ΔΦ/Δt = 200 × 2.0 × 10⁻³ ÷ 0.20 = 2.0 V.
The magnitude is 2.0 V. For direction, the flux through the coil is increasing, so the induced current makes a field opposing it. Write that reasoning out. Examiners award marks for the Lenz’s law argument as well as for the number.
Mistakes that cost marks
- Forgetting N. Calculate flux for one turn, then multiply by the number of turns.
- Using the wrong angle. θ is measured from the normal to the coil, not from the coil’s face. A field parallel to the coil’s face gives zero flux.
- Quoting only the magnitude. If the question asks for direction, state that flux is increasing or decreasing and that the induced field opposes it.
- Mixing up flux and flux linkage. Check the units and whether N is already included.
- Inventing an emf for a steady situation. A constant flux means zero emf, even when the field is large.
- Reading graphs the wrong way. On a flux against time graph, the emf is the gradient (with the minus sign). A steeper gradient means a larger emf.
How to practise it well
Reading notes once is not enough. Induction is a topic where you learn by doing questions, checking your reasoning against a mark scheme, and noticing the same slip twice.
A good routine looks like this:
- Read a clear set of notes on flux, flux linkage and Lenz’s law.
- Do short exam-style questions on one idea at a time.
- Mark your answer against an examiner mark scheme, line by line.
- Record which type of question went wrong and return to it a few days later.
This is the loop Tiber Tutor is built around. Our questions come with examiner mark schemes, so you can review your own answers and see exactly where the marks are. Progress tracking shows which topics are strong and which need more work. Teachers and parents can see the same picture.
Why students use Tiber Tutor for induction

Tiber Tutor is an IB STEM platform for Biology, Chemistry, Physics and IB Maths. Examiners and experienced educators wrote the content. Notes, animated videos, flashcards, cram sheets, topic tests and mock exams are linked, so you can move from a concept to practice questions on the same topic. A custom test builder lets you focus on exactly the topic you need. Our syllabus monitoring and performance analytics show you what to revisit next.
A 7-day free trial comes first. After that, the Per-Subject Plan is $9 per month and the All-Access Plan is $19 per month. Because the content is written by actual IB examiners, we believe it offers the best value for money for students aiming at top IB scores. See the plans on our pricing page, or read more on our page for IB students.
Parents can see how the platform supports a student’s progress on our page for IB parents.
Our view
Induction is a topic where understanding beats memorising. Students who can say, in one sentence, which part of the flux is changing and why the induced field opposes it rarely lose marks on direction.
We built Tiber Tutor around that kind of understanding. Our resources are written by actual IB examiners, so the questions and mark schemes mirror the way the exam rewards reasoning. Notes, videos, questions and tests link to one another, so a mistake in a question leads straight back to the idea behind it.
Our progress tracking and performance insights are designed to show you exactly where you are on the syllabus, which is a level of detail we have not seen elsewhere. We believe that gives students confidence and gives teachers and parents a clear picture, at a price that makes sense for the quality you get.
Oliver
FAQ
What is Faraday’s law of electromagnetic induction?
It states that the emf induced in a circuit equals the negative rate of change of magnetic flux through it. For a coil of N turns, that is ε = −N ΔΦ/Δt. A faster change in flux produces a larger emf.
What is the Faraday’s law formula and what do the symbols mean?
ε is the induced emf in volts, N is the number of turns and ΔΦ is the change in flux in webers. Flux for a uniform field is Φ = BA cos θ. Δt is the time over which the change happens.
Why is there a minus sign in Faraday’s law?
The minus sign is Lenz’s law. The induced current produces a field that opposes the change in flux. This conserves energy and gives you the direction of the current.
Is electromagnetic induction examined at both IB Physics levels?
It has been a higher-level topic in the IB guide. Your teacher and your current subject guide confirm exactly which parts apply to your course and exam. Practise it with questions that match your syllabus version.
Sources
- 13.1 Faraday’s Law, University Physics Volume 2, OpenStax
- 23.2 Faraday’s Law of Induction: Lenz’s Law, College Physics, OpenStax
- Induction and Magnetic Flux, NASA
- Experiment 11: Faraday’s Law of Induction, Illinois Institute of Technology
- IB Physics guide
